The Power and Responsibility of the Committee of Creditors in IBC

IBC will be nine on May 28 — a red letter day in the history of the country’s debt recovery mechanism. IBC has been a landmark legislation. Earlier, insolvency and bankruptcy legislations were fragmented; IBC consolidated and streamlined the insolvency process and defined the rights of creditors and debtors. With a focus on resolution rather than on liquidation, the IBC intends to set the corporate debtor free from the clutches of the debt trap while not causing prejudice to the interests of all other stakeholders, including financial and operational creditors. Clarity of jurisdiction of different courts has also been achieved.

The Power and Responsibility of the Committee of Creditors in IBC

There are, however, glaring loopholes. While one would expect the law to evolve over the years, in its present contour, the role and responsibility of the Committee of Creditors (CoC) need to be thoroughly revisited. Interpreting various provisions, different judgments have put them above the law, their decision sacrosanct and beyond any judicial purview. CoC is the protagonist in IBC.  

This needs a thorough relook to help many corporate debtors tide over the crisis, to ensure entrepreneurial spirit does not die down in oblivion, investment flow remains unabated, and the private sector creates enough wealth and opportunities for the country with over 1.4 billion population to help it reap its demographic dividend. 

What is wrong and needs correction? As per the law, any decision of the CoC approved by a 66% majority of its members with varied degrees of voting share is beyond dispute. Based on a collective individual judgment, the decision is binding on the corporate debtor, creditor and all other stakeholders, including the judiciary. The problem lies right here. Without any defined code of conduct, all decisions of the CoC are not expected to be based on the principle of reasonableness and proportionality. And if not, the very purpose of the IBC loses its sheen. To facilitate the effective and responsible functioning of the CoC, an elaborate, determinative, and efficient code of conduct for its functioning assumes excellent relevance.

The Power and Responsibility of the Committee of Creditors in IBC

The IBBI is aware of the extant lacuna. In a discussion paper, the IBBI said that because the CoC is the “best judge” to make commercial decisions concerning the corporate debtor, its findings cannot be discretionary. According to it, it is one of the “grey areas” that should be filled. Even for the sake of argument, considering that the commercial wisdom of the CoC is unassailable, is the constitutional court bereft of the power to issue an appropriate writ directing for framing appropriate guidelines to fill up the voids? The answer cannot be in the negative. The need for a code of conduct assumes greater importance because once the CoC takes a decision, the aggrieved party is deprived of the legal remedies, except to a limited extent. Power should always be circumscribed with adequate accountability. 

The system has already witnessed plenty of evidence of misuse or non-use of power, judgment and accountability on the part of the CoC. I am a victim. Bankers took over Su-Kam. Two valuers estimated the running company’s fair market value to be Rs 300 crore and liquidation Rs 150 crore. The RP wanted Rs 30 crore to run the company, which the CoC never approved. Hence, the company had to be closed down. The entire CIRP cost was Rs 40 crore. In the end, banks got just Rs 10 crore—a glaring example of misjudgment on the part of the CoC.

Without a set of guidelines to ensure effective monitoring and functioning of the CoC, decisions taken by the representatives can be whimsical and wrong. For other stakeholders, some measure of recourse against the CoC should be put in place. The system is committed to the rule of law. Can the functioning of the CoC be devoid of any code of conduct? It’s a policy matter and needs to be addressed by the legislature. 

Various concerned stakeholders have repeatedly demanded an extensive code of conduct for CoC members to help them discharge their duties in a manner consistent with the letter and spirit of the Code. The IBBI Law Committee has recommended a standard code of conduct for the functioning of the CoC. 

In a recent judgment, the Delhi High Court said, “There is an urgent need for an effective code of conduct for the functioning of the CoC. Even the Adjudicatory Authority is not empowered to do so, as the interference of the Adjudicatory Authority is also limited to the manner outlined in the Code. A code of conduct shall be subservient to the Code and not in excess of it. However, the decision-making process must reflect fairness, reasonableness and objectivity, irrespective of the outcome.”

 http://lithiuminverter.in/inverter/the-rise-of-india-as-the-export-hub-for-lithium-inverters/

What should be there in the Code? It should be based on integrity, objectivity, professional competence, due care and confidentiality. Furthermore, the Code of Conduct must also reflect the fundamental features of the Wednesbury principles of fairness and proportionality to give true meaning to the legislative intent of the IBC. Moreover, it should also reflect the principles of natural justice to be followed by the CoC while taking any measure concerning any stakeholder during the subsistence of the entire CIRP. 

Practical Tips for Effective Parenting: Raising Remarkable Kids

Parents play a critical role in bringing up kids. They are their first teachers, role models, and caregivers. Parents’ nurturing and support of their children significantly impact their development and well-being.

1. Providing Security: Providing security to the kids is the most important aspect of child-raising, and that can only be done by the parents themselves, and that is the relationship between the husband and wife. The children get their first security through their relationship with their parents. This one important aspect can make or break the child’s security forever. Once the kid is born, then the first eight years of upbringing are the most crucial for the child for the rest of his life. So the first thing the child wants is security, which can be provided by the parents only by showing the child that they enjoy a good relationship, which gives the first security to the child. This does not mean parents try to act in front of the child, as this does not work in the long run.

Practical Tips for Effective Parenting: Raising Remarkable Kids

2. Giving Physical and Emotional Love: Physical touch for children is very important in early upbringing as it forms the child’s psyche. As the child is born, the emotional and physical connection with the mother in the womb is already created. Once the child comes out of the womb, it needs physical touch very severely because the child is separated from the comfort of the womb, so the moment the child is born, it needs touch to make it feel safe. Physical contact can be reduced slowly and progressively, but physical communication for the first few years of upbringing is very important. Next are emotions in the kids, and the child starts developing his feelings according to the surroundings. So, if a child as small as three months old starts showing signs of jealousy or love, which can be observed at such an early stage, one can watch the child start dictating if given extra love and care. So, his emotional development begins in the early stages of the first three months.

3. Social Skills: The children learn their initial social skills from their parents and home surroundings. If you have a joint family, the child is learning from everyone, but they will learn from the person spending the most time with the child. So when the first child is born, it generally learns those social skills slowly, but when the second child is born, it learns from the first kid very fast, and social skills are learned faster. As the child discovers things from his surroundings, one has to behave in front of him so that he will understand by watching the people around him. So, one has to make sure of what kind of social skills one wants to teach, and accordingly, parents have to behave like that to infuse those social skills. It starts with the parents, and even nowadays, in the middle class, generally, the child is left in the creche, or the child gets a dedicated Naani or caregiver, and then the child gets the social skills from her. So spending time with the child at an early age is most important, and the child will imbibe many habits and skills by observing parents or the person who will spend the most time with the child.

Practical Tips for Effective Parenting: Raising Remarkable Kids

4. Habits: this is another important factor the child will form if he puts those habits at an early stage. Storytelling by reading books can be started in the first six months, and the diet and hygiene you want to cultivate can also be begun in the first six months. The major challenge is to keep the child away from the mobile phone and TV, where most of the kids get addicted, but it’s because of the parents and the caregiver or any other person spending time with the child. The child should be fed when he is hungry. Otherwise, children should not be forced to eat, which creates a habit for the child to eat by force only. Nowadays, most children are fed in front of the TV and mobile phones, and they don’t eat unless the parents show them the TV or mobile phones. The control of TV and mobile phones depends on the parents, which can be controlled in the initial months of the growing up months.

5. Establishing clear expectations and boundaries: Children thrive when they know what is expected of them and have clear boundaries. Parents can set these expectations by creating rules and consequences, being consistent in their enforcement, and explaining the reasons behind the laws.

https://kunwersachdev.com/the-journey-of-transition-from-business-mogul-to-entrepreneur/

5. Fostering intellectual curiosity: Parents can spark their children’s love for learning by engaging them in stimulating activities, reading to them, and encouraging exploration and questioning.

6. Cultivating social skills: Children learn to interact with others by watching and imitating their parents. Parents can help their children develop social skills by showing the same to kids through their behaviour, as the kids will learn the most from observations rather than teaching them. Sometimes, parents are not very social, and the kids observe that at an early age, so they will imbibe those traits automatically from their parents.

http://lithiuminverter.in/battery/why-choose-lithium-battery-banks-over-lead-acid-batteries/

7. Celebrating achievements: Parents should recognize and celebrate their children’s accomplishments, both big and small. This reinforces positive behaviour and boosts their self-esteem. This automatically comes in if they see their parents celebrating events together like birthdays, anniversaries, or family occasions celebrating small achievements.

9. Showing unconditional love: Children must know their parents’ love is constant, regardless of their mistakes or shortcomings. This unconditional love provides a sense of security and helps them develop resilience. But along with this trait, the parents have to draw lines in certain conditions rather than giving this signal, which is taken for granted by the kids.

10. Seeking help when needed: Raising children can be challenging, and parents should not hesitate to seek help. This may involve consulting with professionals, support groups, or other parents facing similar challenges.

Remember, parenting is a continuous learning process. As children grow and develop, their needs evolve, and parents must adapt their approach accordingly. Parents can help their children blossom into well-rounded, confident, and compassionate individuals by consistently providing love, guidance, and support.sharemore_vert

Green Revolution in Indian Hospitality: First Hotel to Run on Lithium Battery

Breaking the Mold: A Hotel in Delhi Runs on Lithium Battery

When the pollution level in Delhi NCR is at its peak, we realize that the pollution is created by vehicles, industry, stubble burning, open waste burning construction activities, etc. One of the major pollutants is diesel generators, used in homes, industries, commercial spaces, and all areas where power is required in case of grid failure. Su-vastika in India is the first company to replace 300 KVA Diesel Generators with a high-capacity lithium Inverter of 200 KVA. It runs the Hotel in Delhi, which has 80 rooms and a large convocation centre with all the other facilities. Replacing a high-capacity diesel generator with lithium inverters in a running hotel can be complex. This Hotel is the first in the country to have a carbon-neutral and net-zero effect on power. Still, it offers several advantages regarding efficiency, environmental impact, and noise reduction. The Hotel Classic Diplomat is at the Main Road Mahipalpur, New Delhi. The cost of fuel bills will be approximately eight lakhs a year, and a lot of carbon emissions will be saved. The battery life is expected to last ten years, and the approximate savings in the running cost will be 80 to 90 lakhs in the next ten years, which is huge for Indian standards. https://www.google.com/maps/place/Hotel+Classic+Diplomat:+Best+Hotels+in+Delhi+NCR/@28.5478454,77.1231823,17z/data=!3m1!4b1!4m9!3m8!1s0x390d1c1375bcfd41:0x66318f467ed549d4!5m2!4m1!1i2!8m2!3d28.5478454!4d77.1257572!16s%2Fg%2F1hd_2f58t?entry=ttu

This is the first Hotel in Delhi NCR to convert from polluting Diesel Generators to a clean and green solution of lithium Inverters called Battery Energy Storage Systems. This building had the challenge of keeping the DG sets on the top of the building, which used to vibrate in case of power failure. Storing the Diesel was another big challenge, and maintaining the Generators as a dedicated person was required. When there was a power cut, there was complete darkness in the Hotel for almost 1 minute, and the whole operation was affected. Chances of accidents during that 1 minute of darkness were very high. Still, the Lithium Inverters work as an Uninterrupted Power Supply, and power is not flickering. All the equipment works along with the lifts in the Hotel, which is a big relief for the hotel staff and guests. All the air conditioning systems work without restart, and the cooling is maintained when switching the Lithium Inverter. The cooling used to stop and start the Air conditioning used to take more than 8 minutes times, which was another eye-sore for the guests. The NGT served the Hotel the pollution notice for stopping the generators, and they had no choice but to look for an alternative, clean, and easy-to-run arrangement. In the International arena, there are a lot of projects covered by the media, and one of them is :

https://www.cnbc.com/2019/01/04/lithium-ion-battery-to-help-power-a-200-room-hotel-in-scotland-.html

Here’s a comprehensive overview of the process and its benefits:

Advantages of Replacing Diesel Gensets with Lithium Inverters

1. Reduced Environmental Impact: Diesel generators emit harmful pollutants like carbon monoxide, nitrogen oxides, and particulate matter, contributing to air pollution and negative health effects. On the contrary, lithium inverters produce zero emissions, making them an environmentally friendly alternative.
2. Improved Efficiency: Lithium inverters offer higher energy conversion efficiency than diesel generators. This means they convert a larger portion of the input energy into usable electricity, reducing energy waste and operating costs.
3. Reduced Noise Pollution: Diesel generators are notorious for their loud operation, which can disturb guests and disrupt the peaceful ambience of a hotel. Lithium inverters, on the other hand, operate silently, eliminating noise pollution and enhancing the overall guest experience.
4. No Maintenance Requirements: Diesel generators require regular maintenance, having a dedicated person to bring Diesel and take care of the generator, pouring Diesel and maintaining the records of diesel consumption, including oil changes, filter replacements, and tune-ups. Lithium inverters have minimal maintenance needs, reducing overall maintenance costs and downtime.https://suvastika.com/diesel-generator-vs-battery-energy-storage-system/
5. Cost: the running cost of a Diesel Generator is very high compared to the running cost of a Lithium Inverter as the life of the lithium battery bank is a minimum of 7 years, and the maximum could be 12 years, so the cost is recovered between 15 months to maximum three years of running. The life of the Lithium Inverter is 25 years compared to a Diesel Generator, which is a maximum of 10 years. Diesel costs are increasing yearly, and the difference between electricity power and Diesel is widening every two years.

Breaking the Mold: A Hotel in Delhi Runs on Lithium Battery

Process of Replacing Diesel Gensets with Lithium Inverters

1. Assessment and Planning: The first step involves thoroughly assessing the Hotel’s power requirements, including peak demand, average load, and backup power needs. This assessment took a lot of time, and after this assessment, we reduced the sizing from 300 KVA to 200 KVA Lithium Battery Inverter and still left the scope of future requirements.
2. System Design and Installation: Once the assessment was complete, we started looking for a space where this lithium battery bank could be placed, with enough air and open space. We installed these lithium inverters, placed the lithium batteries and inverters, and connected the Hotel’s electrical system to these lithium inverters.
3. Testing and Commissioning: After installation, the system will undergo rigorous testing to ensure proper operation and compliance with electrical safety standards. This includes testing the inverters, batteries, and the overall system performance under various load conditions.
4. We connected the IOT System of the Lithium Battery bank with the local Wi-Fi system of the Hotel to monitor the various parameters of the energy consumption of the Hotel and phase balancing of the Power System and maintain the logs of all the alerts created by the lithium Battery System.
5. Training and Support: The hotel staff was given training on the operation and maintenance of the lithium inverter system. This includes understanding the system’s controls, monitoring energy usage, and troubleshooting potential issues.

Breaking the Mold: A Hotel in Delhi Runs on Lithium Battery

Replacing diesel generators with lithium inverters is a significant investment that can bring long-term benefits in cost savings, environmental sustainability, and guest satisfaction. By carefully planning and executing the transition, hotels can modernize their power infrastructure and contribute to a cleaner and more sustainable future.

 How Hospital X is Leading the Way in Clean Energy with Lithium

 How Hospital X is Leading the Way in Clean Energy with Lithium

Arihant Hospital in India has committed to clean energy by installing a lithium battery system to replace the 125 KVA Diesel generator with a 50 KVA Lithium battery Inverter System. This is the first hospital in India to do so, and it sets a new standard for sustainability in the healthcare industry. This hospital is located in new Gurgaon and is run by the duo Dr Shalini Jain and her husband, the child specialist. https://maps.app.goo.gl/nbApsaxfLwqCjLN69

 As per Dr Shalini Jain, the cost of running the diesel generator was approximately 3Rs 30,000 to 40,000 per month, and the major challenge was that whenever they had to operate, they had first to make sure that the generator was switched on. Then they used to perform any operation. But with this lithium battery system, they do not know if there is any power failure. The lithium battery system will provide the hospital with reliable and clean power while reducing emissions and saving money. The system can also provide backup power in the event of an outage, ensuring that the hospital can continue operating even during a power failure.

The Asian Clean Energy Forum has strongly studied replacing Diesel generators with Lithium battery banks https://asiacleanenergyforum.adb.org/side-event-diesel-generator-replacement-with-lithium-ion-batteries/.

Dr Shalini Jain Arihant Hospital

Arihant Hospital

X-Ray Machine room

The installation of Su-vastika’s lithium battery system is part of the hospital’s broader commitment to sustainability. The hospital has also implemented several other initiatives to reduce its environmental impact, such as energy efficiency measures and water conservation practices.

The hospital’s switch to clean energy is a significant step forward for sustainability in the healthcare industry. Hospitals are major consumers of energy, and their operations can have a significant impact on the environment. By switching to clean energy, hospitals can reduce their emissions, save money, and improve the health of their patients and communities.

Benefits of the lithium battery system

The lithium battery system has several benefits for the hospital, including:

Safety of Sensitive Medical Equipment: This was one of the major challenges faced by the hospital as they had a lot of incidents of failure of sensitive medical equipment where repairs were required. The lift in the hospital used to stop with a jerk when power outages happened, and now we haven’t come to know of any power outages, and the lift is working smoothly on the power cuts.

The Switching Time: This is another big factor. As the power goes or comes back, all the sensitive equipment or normal air conditioners and lights keep working uninterruptedly. In the case of a generator, one has to wait for the diesel generator to switch on and off manually. One dedicated person was involved in getting the diesel from the petrol pump and keeping an eye on a generator whose fuel needed to be refilled.

• Reduced emissions: The lithium battery system will reduce the hospital’s emissions of air pollutants, such as particulate matter and nitrogen oxides. These air pollutants can harm human health, particularly for people with respiratory conditions.
• Saved money: The lithium battery system is more efficient than a diesel generator, so the hospital will save on fuel costs. The approximate yearly cost saving is 3.6 lakh a year. In 10 years, the cost savings will be more than 40 lakh, including the maintenance cost of the generator, as the fuel and maintenance costs are increasing every year, and the carbon credits hospital will be getting extra.
• Improved reliability: The lithium battery system is a more reliable power source than a diesel generator. This is especially important for hospitals, which need a reliable power source to operate critical medical equipment.
• Reduced noise pollution: The lithium battery system is much quieter than a diesel generator so that it will reduce noise pollution for the hospital’s patients and staff.https://suvastika.com/diesel-generator-vs-battery-energy-storage-system/

Commitment to sustainability

The Arihant Hospital’s commitment to sustainability is evident in its switch to clean energy and other initiatives to reduce its environmental impact. The hospital aims to become a carbon-neutral facility within the next five years.https://youtu.be/FeB3k9j9CBU?si=P9eroR7CvXlQiIb_

The hospital’s commitment to sustainability is inspiring other hospitals to follow suit. More and more hospitals are recognizing the need to reduce their environmental impact and are looking for ways to do so. The hospital’s switch to clean energy is a model for other hospitals looking to become more sustainable.

Conclusion

The Arihant Hospital’s commitment to clean energy is a significant step forward for sustainability in the healthcare industry. By switching to clean energy, the hospital is reducing its emissions, saving money, and improving the health of its patients and communities. The  Arihant Hospital’s example inspires other hospitals to follow suit, and it is helping to create a more sustainable future for the healthcare industry.

 

 Get to Know the New Su-vastika Lithium Battery Wall Mount Model

 

 Su-vastika Unveils New Lithium Battery Wall Mount 12.8V/80 Ah having 1 KWh capacity Model. Get to Know the New Su-vastika Lithium Battery Wall Mount Model This 1KWh  Lithium battery can be mounted on the wall, which can be a big space-saving and cost-saving for the user as real estate is getting expensive since there are no fumes or water toppings. It has the safety MCB and can be switched on and off if you don’t want to use it. It comes with the Anderson connector, which ensures that the installation Engineer does not make mistakes while installing the Lithium battery. The lithium battery is of LifePo4 chemistry, the safest proven technology in the world for the last three decades, and has been used in all kinds of usage like electric vehicles, mobile phones, drones, etc.

The benefits of Lithium batteries over living Tubular Lead Acid batteries are:

Longer lifespan: The lithium battery will last 7 to 10 years compared to the Tubular battery, which will not last more than three years.

Higher energy density: The size of the Tubular lead Acid battery and the size of the Lithium battery is beyond anyone’s imagination. The 150Ah Tubular battery is more than 60 KGs. The Lithium is just 10, which is easy for any person to take in hand and can install or remove, whereas the Tubular battery needs two people to handle, and if it is to be installed at the floor level, then you need extra labour to do the same.

Faster charging: The tubular lead acid takes 12 to 15 hours to charge completely, while a lithium battery is charged within 3 to 4 hours.

No maintenance: There is no maintenance required in Lithium batteries, and for Tubular batteries, regular refilling of water is required, which is very tough for any consumer himself as you need a service engineer who can do it only so extra money is shelled out in the maintenance of the tubular battery.

Get to Know the New Su-vastika Lithium Battery Wall Mount Model

Price: The difference in pricing is very nominal these days as Lithium prices worldwide are falling, but the lead prices are mostly increasing every year, and if we consider all the factors, then we realize lithium battery price is lower than the Tubular battery price of 150 and 200 Ah capacity.

As a result of these advantages, lithium inverters are becoming increasingly popular for use in homes and offices for the Inverter/UPS, solar power systems, off-grid systems, and other applications where long battery life and high performance are important. The model 1024Wh battery can be compared with any existing Tubular battery of 150Ah capacity.

As we compare the two batteries in the capacity, we can see the backup time on 400W bulb load, which is equivalent, and if we test on 500W or more load, then the Lithium battery of 1024Wh will give higher backups. The Lithium battery comes with a C1 rating, and the Tubular battery comes with a C20 rating, used in the Inverter industry. Since the lithium battery has a C1 capacity, it’s designed to run higher loads. In contrast, the C20 tubular lead Acid battery is designed to run smaller loads as C20 means capacity divided by 20, say 150/20= 7.5Amps only, which means it’s designed for 100 Watt load if we want five years of life from this battery and can utilize 95% of its capacity. But the moment we put more load than that, the life and efficiency of the tubular battery are affected drastically. As the dealer and user do not understand the Tubular Lead Acid battery of c20 capacity, they use the Lead Acid battery for drawing 500Watt to 800 Watt load, which reduces the backup time and life of the Tubular battery as the Tubular battery backup will drop drastically and life as well. Meanwhile, the lithium battery has C1 capacity and can be used for higher loads; its efficiency and capacity do not degrade.

Get to Know the New Su-vastika Lithium Battery Wall Mount Model

The lithium battery is cheaper than the tubular battery as its life is three times longer, and its capacity is more than the tubular battery if you compare the backup time of 500 watts and more.

Here are some of the benefits of using a lithium inverter:

Longer battery life: Lithium batteries have a lifespan of up to 3 times longer than lead-acid batteries. This means you can get more use out of your battery before it needs replacing.

Higher energy density: Lithium batteries store more energy per unit volume than lead-acid batteries. This means you can get more power from a smaller battery, which can be a big advantage in space-limited applications.

Faster charging: Lithium batteries can be charged more quickly than lead-acid batteries. This means you can get your battery back up to full power more quickly after it has been discharged.

No maintenance: Lithium batteries require no maintenance compared to tubular lead-acid batteries. As everyone knows, water topping is one of the major headaches in tubular lead acid batteries, and spillage is another challenge that permanently ruins the floor of the house. Getting the distilled quality water from the market is another challenge.

The Lithium battery 12.8V/80 Ah is more powerful than the 150Ah Tubular Lead Acid battery.

In India, the highest selling model in the tubular battery is 150Ah, having C20 capacity, and the same can be replaced by the 12.8V/80Ah battery, which comes to 1024Wh battery capacity, which can provide more backup if we use a 500-watt load or more than that load compare to the 150Ah Tubular battery.

The life of the Tubular battery started reducing as we put more load on the Tubular battery as it’s designed for smaller loads only. At the same time, the lithium battery life is not affected till we put a 1000-watt load on it.

The Ultimate Guide: Lithium Battery vs Tubular Battery for Inverter

The Ultimate Guide: Lithium Battery vs Tubular Battery for Inverter

1.2 KW Lithium battery can replace 200 Ah Tubular Lead Acid battery in the inverter/Solar Hybrid inverter or Solar PCU application. This article will discuss the pros and cons and provide detailed points about comparing these two batteries. The backup time, if calculated at 400 Watt or more on the 1.2 KW Lithium battery and the Tubular battery with a capacity of 200 Ah 12Volt, the Lithium battery is the clear winner as the tubular Lead Acid battery is c20 capacity and the Lithium is C1 capacity battery. The Lithium battery of 1.2KW will give a capacity of 1200 watts compared to the 200 Ah Tubular Lead Acid battery, which should give 2.4KW output. Still, because of C20 capacity, it’s unable to provide 2400 watts at any given load. At the 1000-watt load, the Lithium battery can give 1 hour and 10 minutes of backup, and the Tubular 200Ah might give 45 to 50 minutes.https://suvastika.com/lithium-battery-compared-to-tubular-battery/

C20 Rated 150Ah & 200Ah battery backup

Advantages of Lithium batteries

• High energy density: Lithium batteries come in 12 Kgs compared to the 65 Kgs of 200 Ah Tubular Lead Acid battery. Suppose we see the size of the one-tenth of the size of the tubular battery.
• Long lifespan: Lithium batteries have three times the life of the tubular lead Acid battery, which is a very important difference.
• Fast charging: Lithium batteries can be charged in 2-3 hours, while tubular batteries can take up to 15 hours.
• Capacity: Lithium battery of 1.2KW has more backup compared to 12V/200Ah Tubular battery of C20 capacity.
• BMS: The lithium battery comes with the battery Management System, which has complete control of the Lithium battery as the BMS has a lot of functions to perform for the safety and life of the lithium battery, like Equalization of each cell in the battery.
• Protections: The BMS in the lithium battery has the protection of high- and low-voltage batteries and overload and Short-circuit protection, which keeps the battery alive and protects it from any abuse, which is not possible in the tubular lead acid battery.
• Maintenance: Lithium batteries do not require as much maintenance as tubular batteries.

• Cons:
  • High upfront cost: Lithium batteries are more expensive than tubular ones.
  • Narrower operating temperature range: Lithium batteries, as well as tubular batteries, cannot operate in extreme temperatures.
  • Safety concerns: Lithium batteries can be dangerous if not handled properly.

The Ultimate Guide: Lithium Battery vs Tubular Battery for Inverter

Tubular batteries

• Pros:
  • Lower upfront cost: Tubular batteries are less expensive than lithium batteries.
  • Wider operating temperature range: Tubular batteries can operate in extreme temperatures better than lithium batteries.
  • More forgiving of overcharging: Tubular batteries are more forgiving than lithium batteries.
  • Exchange Cost: Tubular batteries are used to have better recycling costs, which is also slowly happening in lithium batteries.
• Cons:
  • Lower energy density: Tubular batteries store less energy than lithium batteries of the same size and weight.
  • Shorter lifespan: Tubular batteries have a 3-5 year lifespan, while lithium batteries can last up to 10 years.
  • Slower charging: Tubular batteries can take up to 15 hours, while lithium batteries can be charged in 2-3 hours.
  • Shallow discharge: Tubular batteries should only be discharged to 50%, while lithium batteries can be discharged to 80% without damaging the battery.
  • More maintenance: Tubular batteries require more maintenance than lithium batteries.

The Ultimate Guide: Lithium Battery vs Tubular Battery for Inverter

Which battery type is right for you?

Your best battery type will depend on your specific needs and budget. A lithium battery is a good choice if you want a battery with a long lifespan, fast charging, and deep discharge capability. However, a tubular battery may be a better option if you are on a budget or need a battery that can operate in extreme temperatures.https://suvastika.com/is-lithium-battery-good-for-inverter-ups/

Here is a table that summarizes the key differences between lithium batteries and tubular batteries:

CHARACTERISTIC	LITHIUM BATTERY	TUBULAR BATTERY
Energy density	High	Low
Lifespan	Ten years	2-3 years
Charging time	2-3 hours	15 hours
High Voltage, Low Voltage, Overload, Short circuit protection	yes	No
Maintenance	No	High
Equalization of battery cells	yes	NO
Capacity	C1	C20
BMS	yes	No
Size and Weight	weight is 10 Kgs, and size is very small compared to the Tubular battery	62Kgs and size is ten times of a Lithium battery

Ultimately, the best way to decide which battery type is right for you is to consider your specific needs and budget

TECHNOLOGY BLOGS

Choosing the Right Battery: 2.4 KW Lithium vs Lead Acid Battery

TECHNOLOGY BLOGS

A 2.4 KW lithium battery can be compared with two tubular batteries of 150 or 200 Ah capacity. So, the 2.4KW Lithium battery will provide higher backup than the Tubular Lead Acid batteries of 150Ah or 200Ah, having a C20 capacity of two numbers. So having a 24Volt or Solar Inverter System with a 200 Ah bank of two batteries will give less backup compared to the 2.4KW Lithium battery bank size of LifePO4 or any other Chemistry. Choosing the Right Battery: 2.4 KW Lithium vs Lead Acid Battery

• Advantages:
  • High energy density: Lithium batteries have a higher energy density than tubular batteries, which can store more energy in a smaller, lighter package. Especially in the Solar Hybrid System, the size matters a lot as the space is very limited, and this battery can be installed with the Solar Inverter in a smaller space.
  • Long lifespan: Lithium batteries have a much longer lifespan than tubular Lead Acid batteries, typically lasting 7-10 years or more, as the tubular battery hardly lasts for three years. Especially in Solar Hybrid Systems, the tubular battery’s life is further reduced. The cycle life of tubular lead acid batteries is 500, while the Lithiunm LifePO4 battery has around 2000 cycles, creating a major difference. The life cycle of a tubular lead acid battery will depend on its maintenance, like refilling the battery water in time, which is the biggest challenge in maintaining the tubular battery. Meanwhile, the lithium battery requires no such maintenance.
  • Fast charging: Lithium batteries can be much faster than tubular batteries, typically in 2-3 hours. For the Solar application, the timings are very important as the Tubular battery takes 12 to 15 hours to charge properly as it needs to charge in 3 stages minimum. Some people install a higher capacity solar charge controller to install more solar panels in the Solar PCU, which charges the Lead Acid battery very fast. The Tubular battery needs more watering, and the batteries also explode in case of fast charging. Lithium batteries can be charged in 2 hours and installed with more solar panels.
  • Deep discharge tolerance: Lithium batteries can be discharged much deeper than tubular batteries without damaging them.
  • Low self-discharge rate: Lithium batteries are very low, meaning they can hold their charge for much longer when unused.
• Disadvantages:
  • Charger Parameters: Lithium batteries require a very different charger than the Tubular Lead Acid battery charger, and the charger designed for the Lithium battery will only make the life of the Lithium battery; otherwise life of the Lithium battery will be affected.
  • Narrower operating temperature range: Lithium batteries have a narrower operating temperature range than tubular batteries and may not perform as well in extreme temperatures.

Choosing the Right Battery: 2.4 KW Lithium vs Lead Acid Battery

Tubular Battery

• Advantages:
  • Lower upfront cost: Tubular batteries are less expensive to purchase upfront than lithium batteries.
  • Wider operating temperature range: Tubular batteries are wider than lithium batteries and can perform better in extreme temperatures.
• Disadvantages:
  • Lower energy density: Tubular batteries have a lower energy density than lithium batteries, which can store less energy in a larger and heavier package.
  • Shorter lifespan: Tubular batteries have a shorter lifespan than lithium batteries, typically lasting 2-3 years. Especially in solar applications, the life is further reduced.
  • Slower charging: Tubular batteries take longer than lithium batteries, typically 15-20 hours.
  • Less tolerant of deep discharge: Tubular batteries should not be discharged to more than 50% of their capacity, or they will be damaged.
  • Higher self-discharge rate: Tubular batteries have a higher rate than lithium batteries, meaning they will lose their charge more quickly when not in use.

Choosing the Right Battery: 2.4 KW Lithium vs Lead Acid Battery

Overall

Lithium batteries offer several advantages over tubular batteries, including higher energy density, longer lifespan, faster charging, deeper discharge tolerance, and lower self-discharge rate. However, they are also more expensive to purchase upfront. Tubular batteries are less expensive upfront and have a wider operating temperature range. However, they also have a shorter lifespan, slower charging times, and are less tolerant of deep discharge.https://suvastika.com/is-lithium-battery-good-for-inverter-ups/

Which type of battery is right for you will depend on your specific needs and budget. A lithium battery is a good choice if you want a battery with a long lifespan, fast charging times, and deep discharge tolerance. A tubular battery may be a better option if you are on a tighter budget or need a battery that can operate in extreme temperatures.

Here is a table that summarizes the key differences between lithium and tubular batteries:

FEATURE	LITHIUM LIFEPO4 BATTERY	TUBULAR BATTERY
Energy density	High	Low
Lifespan	7-10 years	2-3 years
Charging time	2-3 hours	15-20 hours
Capacity rating	C1	C20
Self-discharge rate	Low	High
BMS	Yes	No
Protections	yes	No

I hope this information is helpful. Please let me know if you have any other questions.

3 Phase 10KVA Lift Inverter: A Comprehensive Guide

TECHNOLOGY BLOGS

3 Phase 10KVA Lift Inverter: A Comprehensive Guide

A 10KVA 3-phase lift inverter is a device that converts AC power to DC power when the power is available to charge the Lift Inverter battery bank, and it converts DC to AC power when the power fails to power the Lift load from the battery bank. It provides backup power for elevators in the event of a power outage. The Lift inverter is also called an Emergency Rescue device ERD.https://suvastika.com/the-benefits-of-lift-inverters-erd-for-buildings-and-owners/

10KVA 3-phase lift inverters are typically used for elevators with a capacity of 8 to 10 passengers. They are designed to provide a smooth and reliable power supply to the elevator, even during heavy loads. Generally, the capacity of the lift motor is 3 to 4.8 KW in these capacity lifts. Nowadays, the Lift Inverters come with a Lithium battery to save space and increase the life of the Lithium battery to 10 years rather than using. Lead Acid SMF battery has a maximum life of only two years. There is a difference between Online UPS and Lift Inverters called ERD, as Online UPS technology differs greatly from the Lift inverters. Most companies offer Online UPS, which is not meant for the lift application. Online UPS will have failures more often in the Lift application, and the power bill increase and the backup time will be the next challenge.

Lift Inverter/ERD with a lithium battery.

Some of the features of 10KVA 3-phase lift inverters include:

Pure sine wave output for efficient operation of the elevator motor or Lift motor and system.
High surge capacity to handle the starting load of the elevator motors and other loads attached to the Lift system.
Low battery cut-off protects the batteries from over-discharge and overcharge cut-off feature to protect the batteries from overcharging.
Automatic transfer switch to seamlessly switch between mains and inverter power, which is a very important factor to select as there should not be any jerk when the main power fails and comes back.
Overload and Short circuit protection to prevent damage to the 3-phase Lift inverter.

The IOT feature monitors the Lift Inverter on Bluetooth and WiFi-based systems on the phone and computer to check the power failure log and the alerts to be stored in the application.
10KVA 3-phase lift inverters are available from various manufacturers along with the battery bank in 1.5 Lakhs to 2 Lakhs of Indian Rupees.

3 Phase 10KVA Lift Inverter: A Comprehensive Guide

Here are some of the benefits of using a 10KVA 3-phase lift inverter:

Reliable backup power: A lift inverter provides a reliable source of backup power for elevators in the event of a power outage. This ensures that passengers can still use the elevator safely and conveniently.
Reduced costs: A lift inverter can help to reduce the costs associated with elevator downtime. When an elevator is down, it can be expensive to repair and can disrupt business operations. A lift inverter can help to prevent these problems by providing a backup power supply.
Improved safety: A lift inverter can help improve elevators’ safety by providing a smooth and reliable power supply. This can help to prevent accidents caused by power surges or fluctuations.

Many people have a phobia about travelling in Lifts as they have encountered Lifts being stopped midway with a high jerk, and they get panic attacks during that stoppage for 30 seconds to 1 minute; there is no light, and in the darkness, they get panic attacks.

If you are considering installing a lift inverter in your building, there are a few things you should keep in mind:

Choose the right size inverter: The size of the inverter you need will depend on the capacity of your elevator. It is important to choose an inverter that is large enough to handle the starting load and running load of the elevator motor.
Consider the features you need: Some lift inverters offer additional features, such as remote monitoring and alarm capabilities. Consider which features are important to you and choose an inverter with them.
Have the inverter installed by a qualified technician: Lift inverters are complex devices and should only be installed by a qualified technician. This will ensure that the inverter is installed correctly and safely. The earthing of the inverter is another aspect that is to be taken care of by a qualified engineer while installing the lift inverter machine

TECHNOLOGY BLOGS

 Why Lithium Battery is the Future of the Inverter/UPS Industry

Lithium and lead acid batteries, especially tubular batteries, are no match as lead acid batteries are old technology and pollution creators and have a lot of challenges to use in the inverter/UPS industry. Especially when the price is compared between the Lithium battery and the Tubular Lead Acid battery, one will be surprised that the Lithium battery is cheaper than the tubular Lead Acid battery. The Inverter Lithium battery system is called the Battery Energy Storage System, which is in huge demand as they have more features than basic Inverter or UPS technology.

What are the Tubular Lead Acid Battery Health Hazards in Inverter/UPS Industry? People using Tubular Lead Acid batteries at homes and offices are not aware of the consequences regarding the health hazards of these battery institutions.

When they charge and discharge, the Ttubular Lead-acid batteries create a lot of fumes, which are healed knowingly and unknowingly by the people around them. World Health Organisation has been warning about the health hazards resulting from the pollution of Lead in different areas and is trying to create awareness regarding Lead poisoning. So I thought let me also make people aware regarding the risks of Tubular Lead Acid battery, which is being installed by the people inside their homes and offices, and no one knows how dangerous it can be when it spreads the lead fumes that are inhaled especially by the kids.

Lithium batteries offer several advantages over traditional tubular lead-acid batteries in usage with inverter/UPS applications, including:

• Higher energy density: Lithium batteries can store more energy in a smaller and lighter package than lead-acid batteries. This makes them ideal for applications where space and weight are critical factors, such as home and office inverters and UPS systems.
• Longer lifespan: Lithium batteries typically have a lifespan of 7-10 years, compared to 2-3 years for Tubular lead-acid batteries. This means that lithium batteries can provide backup power for more extended periods without needing to be replaced.
• Faster charging: Lithium batteries can be charged much faster than lead-acid batteries. This is important for inverter/UPS applications, where systems must quickly recover from a power outage.
•  Maintenance: Lithium batteries require no maintenance compared to Tubular lead-acid batteries, which need to have their water levels checked and topped up regularly. This can save time and money on maintenance costs. it is very cumbersome to top up the water regularly, and getting the right distilled water is another challenge.
• Safety: Lithium batteries are generally considered to be safer than lead-acid batteries. They are completely safe, especially Lithium LifePO4-based chemistry, and they do not contain any toxic materials, especially Lead, which is the most dangerous and pollutant material.
• Costing: The cost of lithium battery and Tubular battery is very comparable, especially for the 10KVA Inverter has 15 batteries as a backup, having 150 Ah tubular battery and equivalent Lithium battery 10KVA price is cheaper than the cost of Tubular lead Acid batteries.
• IOT-based System: The new technology offers Bluetooth and Wi-Fi-based monitoring and GPS-based systems to track the product location.
• Digital Warranty: The new Lithium battery has the BMS, which has the option of a digital warranty, which solves the major warranty issue and creates trust between the company and the user.
• https://www.spglobal.com/esg/s1/topic/the-future-of-battery-technology.html

In addition to these advantages, lithium batteries are becoming more affordable and accessible. https://suvastika.com/benefits-of-lithium-battery-in-inverter-ups/ As a result, they are becoming increasingly popular in inverter/UPS applications.

Here are some specific examples of how lithium batteries are being used in the inverter/UPS industry:

• Residential inverters: Lithium batteries are becoming increasingly popular in residential inverters, as they offer many advantages over traditional lead-acid batteries, such as longer lifespan, faster charging, and lower maintenance.
• Commercial inverters: Lithium batteries are also used in commercial inverters like those used in data centres and telecommunications facilities. Lithium batteries offer several advantages in these applications, such as high energy density, long lifespan, and reliability.
• UPS systems: Lithium batteries are also being used in UPS systems, such as those used in hospitals and offices. Lithium batteries offer several advantages in these applications, such as fast charging, low maintenance, and safety.

Lithium batteries offer several advantages over traditional lead-acid batteries in inverter/UPS applications. As a result, they are becoming increasingly popular and are expected to play a significant role in the future of the inverter/UPS industry.

Lift Inverter, Lift Inverter vs Online UPS for Lift Backup: A Detailed Comparison

• Converts AC power from the mains to DC power and then back to AC power, but only when the mains power fails—also, converter AC to DC power for charging the battery when mains power is present.
• This means there is no switching delay when the mains power fails, but the lift will continue to operate smoothly without any jerk or interruption.
• Lift inverters are typically more efficient than online UPSs, as they only convert power when needed. This saves a lot of power compared to the Online UPS as Online UPS continues to draw extra power when Mains is present for converting it into AC to DC and then AC again.
• Lift inverters are also typically more compact and lightweight than online UPSs.https://www.kunwersachdev.com/thoughts/personal/lift-inverter-as-a-power-backup/11/
• Lift Inverters nowadays, called Emergency rescue Devices, have the option of working on a Lithium battery and can provide a backup time of up to 3 days. They can replace Generators and can save pollution.
• The lift Inverter or ERD can run on Solar power to save the grid power and make the environment green.
• The IOT feature enables the control of the Lift Inverter through Bluetooth, Wi-Fi and GSm to control and monitor the parameters of the Lift Inverter/ERD and control them remotely through the mobile application.

Online UPS

• Converts AC power from the mains to DC power and then back to AC power continuously, even when the mains power is available.
• This means that the lift always operates on clean, regulated DC power, regardless of the quality of the main power.
• Online UPSs have no switching delay, so there is no jerk or interruption when the mains power fails.
• Online UPSs are typically less efficient than lift inverters, as they constantly convert power.
• Online UPSs are also typically larger and heavier than lift inverters.https://en.wikipedia.org/wiki/Uninterruptible_power_supply

Comparison of Lift Inverter and Online UPS for lift back up

Which one is better for lifting back up?

It depends on the specific requirements of the lift installation. If the lift is in a critical location, such as a hospital or a high-rise building, an online UPS may be the better choice, as it will provide the most reliable and uninterrupted power supply. However, a lift inverter may be a better option if the lift is in a less critical location or if cost is a major factor.

Additional considerations

• Lithium batteries: Lift inverters can be powered by lithium batteries, which are more efficient and have a longer lifespan than traditional lead-acid batteries.
• Remote monitoring: Some lift inverters and online UPSs offer remote monitoring capabilities, which can be useful for monitoring the system’s health and receiving alerts in case of problems.
• Warranty: Some lift inverters and online UPSs offer longer warranties than others.

Conclusion

Both lift inverters and online UPSs can provide reliable backup power for lifts. The best option for a particular installation will depend on the lift’s specific requirements and the available budget.